Filter
Top Products
- Press OK buttonto confirm and enter the nextdigitsetting.
- When theareacode has been set (6 digitslength),press OK button once
to enter thelongdistance code (LDS CODE) setting(4digits length).
- The LCD displays SET LDS CODE.
- Use
or button to select the first digit of the LDS code. Ifthelong
distance code is01,then the first two digits mustbeleft blank. To insert a
blank, press OK.
- Press OK buttonto confirm and enter the nextdigitsetting.
- Press X button to exit to the standby mode.
2.7 - SET FLASH
- After entering the SET FLASH menu, press OK.
- Use
or button to select theflashtime (100ms/300ms/600ms).
- Press OK button to confirm.
(In the UK, the default value is 100ms, in France, the defaultvalueis
300ms.)
- Press X button to exit to the previous menu.
2.8 - DIM: X- - ->X
- After entering the DIM: X--->X menu, press OK.
- Use
or button to select ON/OFF to activate/deactivate the
DIM: X- - ->X function.
- Press OK button toconfirm.(The default mode is ON)
If the DIM: X- -->Xfunction is activated, the maximum number of digits that
can be shown on the LCD is 18 small digits.
If the DIM: X--->Xfunctionis not activated, the maximum number ofdigits
SETTING UP
10