Filter
Top Products
7
2. To change the minutes, press and release the [NEXT] or [PREVIOUS] button
until the desired setting is announced.
3. To store the minutes, press and release the [STOP/SET] button. The unit
confirms the setting and enters the Rings to answer menu.
Setting the Rings to Answer
This setting allows you to select the number of rings before the unit answers a call.
The default setting is 4.
1. The unit announces, “Ring to answer (the current ring to answer setting) To set
ring, press next… press set to continue.”
2. To change the ring to answer, press and release the [NEXT] or [PREVIOUS]
button until the desired setting is announced.
(Available options are 2, 4 or Toll Saver)
3. To store the number of rings to answer, press and release the [STOP/SET]
button. The unit confirms the setting and enters the Security Code menu.
Toll Saver
The toll saver allows you to save the cost of making a call when you are accessing
your messages remotely.
• If you have new messages, the unit will answer after the 2
nd
ring.
• If you have no new messages, the unit will answer after the 5
th
ring.
Therefore if you have no messages you can hang up after the 3
rd
ring and save the
cost of making a call.