Filter
Top Products
22
3. Press the memory button again. The display shows
ENTER NAME
.
4. Use the handset touch-tone pad to enter a name (up to 15 characters).
More than one letter is stored in each of the number keys. For example,
to enter Bill Smith, press the 2 key twice for the letter B. Press the 4 key
3 times for the letter I. Press the 5 key 3 times for the letter L, then press
the 5 key 3 times for the second letter L, and press the 1 key to insert a
space between the first and last name. Press the 7 key 4 times for the
letter S; press the 6 key once for the letter M; press the 4 key 3 times for
the letter I; press the 8 key for the letter T; press the 4 key twice for the
letter H.
NOTE: If you make a mistake press the chan/delete button to backspace and
erase the wrong character(s) or number(s).
5. Press the memory button again to save your selection. The display
shows
ENTER TEL NUMBR
.
6. Use the handset touch-tone pad to enter the area code followed by the
telephone number (up to 24 digits, including pauses) and press the
memory button again to save your selection. The unit beeps to confirm.
7. To enter another name and number in a different memory location,
return to step 1 and repeat the process.
CHANGING A STORED NUMBER
Use the Storing A Number In Memory procedure to change a stored number
and replace the old phone number with a new phone number.
When
REPLACE MEMO?
shows in the display, you must press the memory
button on the handset to confirm replacement.
DIALING A STORED NUMBER
1. Make sure the phone is ON by pressing the talk/callback button on
the handset.
2. Press the memory button on the handset.
3. Press the number key (0-9) for the desired memory location. The stored
phone number dials automatically.
OR
1. Make sure the phone is OFF (not in TALK mode).