Filter
Top Products
7
BATTERY LOW INDICATOR
When a battery has not been installed or needs
to be replaced, the BATT. LOW indicator
flashes rapidly.
ANSWERING MACHINE SETUP
This section shows you how to set up your
answering machine to receive incoming calls.
Before you begin the setup, you must be sure
the answerer is on.
TURNING ON THE ANSWERING MACHINE
Press and hold the ANS.ON button to turn the
answering machine on and off (the unit beeps
twice and a voice prompts
"functions on"
or
"functions off"
).
SKIP
ANS. ON
MEMO
PLAY
•
STOP
ERASE
ANNOUNCE
MICBATT LOW
REVIEW
MESSAGES
ANSWER ON
ANS. ON button
MESSAGES/ANSWER ON
indicator light
SETTING THE VOICE TIME/DAY
• Press and hold the DAY button to set the
day of the week.
• Press the HOUR button to set the hour
(a.m. or p.m.).
• Press the MINUTE button to set the
minute. When you hold the MINUTE
button, it advances the time in
5-minute increments.
• Press and quickly release the DAY button
to review the day/time setting.
LO VOLUME HI
MINUTE HOUR DAY
MINUTE button
HOUR button
DAY button
BATT. LOW indicator light
NOTE: The unit takes approximately 10
seconds to emit the voice prompts
"functions on" and/or "functions off."
When the answerer is on, the MESSAGES/
ANSWER ON indicator lights. When the day
and time need to be set or the outgoing
announcement needs to be recorded, the
MESSAGES/ANSWER ON indicator light
flashes rapidly.
2-9827 US IB E 2 1/31/98, 6:52 PM7