Filter
Top Products
4
TABLETOP INSTALLATION
NOTE: Make sure that you have inserted the battery before installing the
phone. If you have not, see p. 3 for battery installation information.
NOTE: Only use the Thomson 5-2399 AC adapter that came with this unit.
Using other adapters may damage the unit.
2
6
1
1. Plug the telephone line cord into PHONE LINE jack on the back of the unit
and the other end into a modular jack RJ11C .
2. Plug the handset cord into the handset and into the telephone jack on the
left side of the unit.
3. Set the PULSE/TONE switch on the left side of the phone to TONE if you use
touch-tone service; set it to PULSE if you have rotary service.
4. Adjust the RINGER volume switch on the left side of the phone to the
desired setting (the phone will only ring with the ringer set to LO or HI).
5. Adjust the ANSWERER volume switch on the right side of the phone to the
desired setting.
6. Plug the AC power adapter into the phone and into an AC outlet.
PULSE/TONE switch
RINGER volume switch
ANSWERER
volume switch
US IB E 1 4/3/97, 2:46 PM4