Filter
Top Products
27
Cannot hear phone • Press VOLUME button on the handset.
You experience • Charge battery.
noise, or fading in • Is handset out of range? Move closer to the base.
and out • Relocate the base unit away from TV’s computers, micro
waves or any other appliances or electronic devices that
may cause interference.
• Make sure base is not plugged into an outlet with
another household appliance.
Unit beeps • You may be receiving an out-of-range alert, move closer
to the base.
• Place handset in base for 10 seconds to reset the
phone. The CHARGE/IN USE comes on when reset is
successful.
• Put handset in base for 12 hours to recharge battery.
• Clean charging contacts on handset and base with a soft
cloth or an eraser.
• See solutions for “No dial tone.”
• Replace battery.
Cannot hear the • Set the RINGER to ON.
PAGE/FIND tone
Range is shorter • Position the base antenna upward.
than normal
Battery will not hold • Be sure you are sufficiently charging the battery.
a charge The battery should be charged for 12 hours.
• Make sure battery contacts on both the handset and the
base are making contact and are clean; free of dirt or lint.
• When the handset is placed in the base, make sure that
the base CHARGE/IN USE light is on.
Memory Dialing • Memory location must be 2 digits (i.e, 01,02, etc.).
does not work • Did you program the memory location keys correctly?
• Did you follow proper dialing sequence?
• Make sure TONE/PULSE switch is correctly set.
Problem Solution