Filter
Top Products
CHANGING THE BATTERY
1. Remove the battery compartment
door.
2. Remove the battery pack.
3. Insert the new battery into the
compartment on the back of the
handset.
4. Replace the battery compartment
door.
5. Return the handset to the base unit
for at least 12 hours to adequately
charge a new battery pack.
BATTERY SAFETY PRECAUTIONS
• Don’t disassemble, mutilate,
puncture, wet, or dispose of
battery in fire. Like other batteries
of this type, if it is burned or
punctured, it could release toxic
materials which can cause injury.
• Keep batteries out of the reach of
children.
Ni-Cd
RBRC
RBRC
Your cordless handset is powered by a nickel cadmium battery pack
(#5-2419). The battery pack needs to be recharged periodically. A fully charged
battery gives you approximately 4 hours of talk time or 7 days of stand-by
time.
Return the handset to the base whenever possible to keep the battery
adequately charged.
The handset runs on a consumer-replaceable, nickel-cadmium battery pack. If
you experience any of the following problems, you may need to replace the
battery pack: short talk time, poor sound quality, limited range, CHARGE/IN
USE light fails to light. Make sure phone is OFF before you replace battery.
NOTE: The RBRC
seal on the battery
used in your product
indicates that we are
participating in a
program to collect
and recycle Nickel
Cadmium batteries throughout the
United States of America. Please call
1-800-8-BATTERY for information or
contact your local recycling center.
24