Filter
Top Products
1. Disconnect power from the base by pulling the plug out of
the back of the unit.
. Press and hold the page button and while holding the
page button reconnect the power.
. Continue to hold the page button until the charge/in use
light ashes rapidly.
. Release the page button.
5. Press and release the page button on the base once.
All handsets are de-registered and HANDSET NEEDS
REGISTRATION shows in the display.
As you become familiar with this system, you may prefer to
use the system’s original settings. Follow the steps below to
return to the factory default settings.
1. Press the caller ID-volume ( 6 or 5) button to scroll to the
DEFAULT SETTING sub-menu.
. Press the program/mute button to enter the menu.
DEFAULT SETTING 1YES 2NO shows in the display. The
default setting is 2NO.
. Use the touch-tone pad to select 1YES or 2NO, or use the
caller ID-volume ( 6 or 5) button to move the cursor to
1YES or 2NO.