Filter
Top Products
With this feature, you can transfer all the incoming calls to the answering system.
When the phone rings, press the button on the handset. The answering
system will answer the call for you.
After you press the or button on the handset, the screen displays the
built-in call timer and counts the length of time of the call in minutes and seconds.
If you place the handset in the cradle while the handset is off the hook (during a call),
the call is automatically disconnected.
There are two ways to set the ringer volume. One is the traditional way as described
in the Programming Functions; Handset Setup; Ringer Volume menus. The other one
is this short cut to ringer menu.
1. Make sure the phone is (not in TALK mode).
. Press the button to display SET RINGER LEVEL 5.
. Use the (6 or 5) button to scroll to your selection. LEVEL 5 is
the default setting.
.
Press button again to save and display the new selection for a few seconds.
If you subscribe to the combined Call Waiting Caller ID service from your local telephone
company, you will receive Caller ID information (if available) on Call Waiting calls. During
a phone call, you will hear a beep to indicate another call is waiting on the line and the
screen displays Caller ID information for the waiting call.
• To connect to the waiting call, press the or button on the handset,
and your original call is put on hold.
•
To switch between the two calls, press the or button.