1
. Select 2NO, if you do not want to de-register.
5. If you select 1YES, press the button and MOVE NEAR TO
BASE displays for
seconds, then CONFIRM? 1YES 2NO appears in the display.
6. Press the touch-tone pad to select 1YES or 2NO, or use the
(6 or 5) button to scroll to 1YES or 2NO.
7.
If you select YES, press the button to conrm. DE-The
screen displays REGISTER.... You will hear a conrmation tone. Then the screen
displays DEREGISTERED to conrm the handset is deregistered.
HANDSET NEEDS REGISTRATION
If one or more handsets becomes lost, you should de-register all handsets to ensure
proper system operation.
1. Disconnect power from the base by pulling the plug out of the back of the unit.
. Press and hold the button and while holding the button reconnect the
power.
. Continue to hold the button until the charge/in use voicemail light ashes
rapidly.
. Release the button.
5.
Press and release the button on the base once. All handsets are de-registered
and the screen displays HANDSET NEEDS REGISTRATION.
As you become familiar with this system, you may prefer to use the system’s original
settings. Follow the steps below to return to the factory default settings.
1
. Press the (6 or 5) button to scroll to the DEFAULT SETTING
sub-menu.