Filter
Top Products
5
XX represents the number of new CID records not
reviewed.
Indicates there are no CID records in memory.
Indicates the memory location contains no user
memories and
the user is trying to mark a specic
user record for VIP MELODY.
May indicate handset is too far away from the base
or that the power has been interrupted. Move closer
and check connections.
Someone pressed the nd button on the base
or delete/intercom/conf button on the handset.
Indicates a repeat call message. Indicates a new
call from the same number was received more than
once.
Indicates handset is searching for the base.
Indicates the handset is in speakerphone mode.
Indicates incoming call is from an area not
serviced by CID or the CID information was not sent.
The following messages show the status of the answering system or help you set up
and use the system.
Indicates the total number of messages.
The voice time/day stamp needs to be set.
Answering system is turned off.
The system is answering a call.
Answering system memory is full.
The system is recording a memo or an
announcement.
External line remote answering system.