Filter
Top Products
. Press the mute/menu OK button to conrm. You will hear a conrmation tone and
your selection shows in the display.
Your packaged handset(s) are pre-registered and ready to use. It is not recommended
that a handset be registered again unless absolutely necessary.
1. Press the
CALLER ID-VOLUME ( 6 or 5) button to scroll to the REGISTRATION
sub-menu.
. Press the mute/menu OK button to enter the menu.
REGISTRATION 1YES42NO
shows in the display. The default setting is 2NO.
. Use the touch-tone pad to select 1 for
or for . Or use the
CALLER ID-VOLUME ( 6 or 5) button to scroll to 1YES or 2NO.
. If you select
1YES, press the mute/menu OK button. HOLD BASE PAGE FOR 5
SECONDS, THEN PRESS HANDSET PROGRAM shows in the display. (Your handset
should be held near the base during registration process.)
5. Press and hold the nd button on the base unit, the charge/in use voicemail
indicator ashes. Press the handset mute/menu OK button. REGISTERING shows
in the display. HANDSET X REGISTERED shows in the handset display, where X is
the handset number. You may now rename your handset. (Refer to Step & of
Handset Name Section)
De-registration cancels registration. During the de-registration process, keep the
handset near the base.
1. Press the
CALLER ID-VOLUME ( 6 or 5) button to scroll to the DEREGISTRATION
sub-menu.
. Press the mute/menu OK button to enter the menu.
DEREGISTRATION 1YES42NO
shows in the display The default setting is "2NO".