Your phone has the capability to receive Handset and
Base rmware upgrades.
1.
When new rmware is available, the handsets will
display a New Firmware Available screen, which will
ask the user if they want to perform an update.
2.
You will have the option to download rmware
immediately or wait until later.
3.
To down load the new rmware simply follow the
prompts in the handset screen.
4.
During the software update the base LED’s will ash
alternately with Power & Ethernet. The handset will
display rmware update in process in the screen.
5.
A rmware update notication is also displayed
on the handset with specic screen and message
when process is complete.
: It will take several
minutes to install new
software. During this time you
will not be able to use your
phone.
: It will take several
minutes to install new
software. During this time you
will not be able to use your
phone.
: The software upgrade
from the network is split into
two sequences. At the end
of the second sequence, the
base will reboot and nish
software update. The Power
and Ethernet LED's will
illuminate.
: The software upgrade
from the network is split into
two sequences. At the end
of the second sequence, the
base will reboot and nish
software update. The Power
and Ethernet LED's will
illuminate.