Filter
Top Products
The display shows the duration of the current call.
After you hang up, the total duration displays briey.
1. Press , then dial the number you want.
- OR -
Dial the number rst, then press
.
- OR -
Press
to enter your phonebook, scroll to desired
name, then press
.
- OR -
Press and release
to access Received Calls list
or press and hold
to access Dialed Calls list,
use
or to scroll to desired number, then press
.
If Auto-Talk is set to On and the Handset is in
the charge cradle, simply pick up the handset
(when ringing) and the phone will answer the call
automatically.
If the handset is NOT in the charge cradle or Auto-talk
is turned Off, press
to answer the call.
Providing you have subscribed to your network’s
Caller-ID service, the caller’s number and name is
displayed after the rst ring.
Press or simply place the handset back on the
charge cradle.
During a call, Use
to
increase or
to decrease
the volume level. The display
will show the current level : 2
bars are the minimum and 10
bars are the maximum
Press
when receiving
an incoming call to silence the
ringer. The handset displays a
red X in the CID information.
During a call, Use
to
increase or
to decrease
the volume level. The display
will show the current level : 2
bars are the minimum and 10
bars are the maximum
Press
when receiving
an incoming call to silence the
ringer. The handset displays a
red X in the CID information.
: If you make a mistake,
while entering the number,
press
to delete the last
digit entered or multiple times
to clear all digits.
: If you make a mistake,
while entering the number,
press
to delete the last
digit entered or multiple times
to clear all digits.
At any time during a call, just
press
, to switch back to
handset mode, press
again. While in speakerphone
mode, the display will show a
speakerphone icon.
At any time during a call, just
press
, to switch back to
handset mode, press
again. While in speakerphone
mode, the display will show a
speakerphone icon.