GE 28214xx2 Cordless Telephone User Manual


 
0

If one or more handsets become lost, you should de-register all handsets to ensure
proper system operation.




1. Disconnect power from the base by pulling the plug out of the back of the unit.
. Press and hold the
 button and while holding the  button reconnect the
power.
. Continue to hold the
 button until the charge/in use light ashes rapidly.
. Release the
 button.
5. Press and release the
 button on the base once. All handsets are
de-registered and the screen displays HANDSET NEEDS REGISTRATION.

1. Make sure your phone is  (not in TALK mode).
. Press the
 button to go to the main menu.
. Press
 (5 or 6) button to scroll to .
. Press
 button to conrm and you may program the following
items: Ringer Tone, Ringer Volume, Key Tone.

You may choose from ve different ringer tones and ve different melodies.

1. Press the  (5 or 6) button to scroll to the 
sub-menu.
. Press
 button to enter the menu. The screen displays 4 1 OF 10.
01 is default setting.
. Use the
 (5 or 6) button to scroll to the desired setting
(1 through 10). You will hear a sample of the ringer tone/melody you select.
. Press the
 button to save your selection. You will hear a
conrmation tone and the selected ringer tone shows in the display.