GE 28214xx2 Cordless Telephone User Manual


  Open as PDF
of 48
 
18

When this function is , during an external call, you may lift the handset to answer a
call immediately without pressing any buttons. To end a call, put the handset back on
the base cradle directly.

1. Press the  (5 or 6) button to scroll to the  sub-menu.
. Press
 button to enter the menu. The screen displays > NO YES.
.
Use the  (5 or 6) button to scroll to your selection. NO is the
default setting.
. Press the  button to conrm.

Your packaged handset(s) are pre-registered and ready to use. It is not recommended
that a handset be registered again unless absolutely necessary.

1. Press the  (5 or 6) button to scroll to the 
sub-menu.
. Press the
 button to enter the menu. The screen displays YES4NO.
The default setting is NO.
. Use the
(5 or 6) button to scroll to  or .
. If you select
, press the button. The screen displays HOLD
BASE FIND FOR 5 SECONDS, THEN PRESS MENU OK KEY. (Your handset should be
held near the base during registration process.)
5. Press and hold the
 button on the base unit, the charge/in use indicator
ashes. Press the handset  button. The screen displays
REGISTERING. The handset screen displays REGISTERED. You may now rename
your handset. (Refer to Step & of Handset Name Section)



 previous next