Filter
Top Products
36
When the answering system picks up:
1. Press the answerer/format button on the cordless handset to access the
answering system.
2. Listen as the caller leaves a message.
3. Press the TALK/callback button to speak to the caller, or press the
answer/format button to stop screening the call.
MEMORY FULL
When the answering system’s memory is full, the system answers after 10
rings, beeps, and waits for you to enter the 3-digit security code. You have
10 seconds to enter the security code before the phone hangs up.
You should erase some of the messages in order for the system to record
incoming messages.
NOTE: The unit also answers after the 10th ring if it is turned off. To access
the answering system, enter your 3-digit security code after you hear the beep.
ACCESSING THE ANSWERING SYSTEM FROM ANOTHER LOCATION
You can access your answering system from any touch-tone phone by
entering your 3-digit security code after you hear the outgoing
announcement.
1. Dial the phone number the answering system is connected to.
2. After the answering system answers, enter the security code after you
hear the tone.
3. Follow the voice menu to use the answering system’s remote functions.
The remote feature enables you to perform the following functions:
To Press this Button
Review message 1
Play back messages 2
Stop message playback 2
Erase message 0 (during message playback)