Filter
Top Products
15
6. Press FLASH/PROGRAM again to store your selection.
LOCAL AREA CODE
NOTE: This setting may be made with the base or the cordless handset.
1. Press the FLASH/PROGRAM button until
SET AREA CODE - - -
or
AREA
CODE - - -
shows in the display. - - - is the default setting.
2. Use the cordless handset or base number pad to enter your three digit
area code.
3. Press FLASH/PROGRAM again to store your selection.
NOTE: You can press FLASH/PROGRAM at any time to go to the next option.
REGISTRATION (LINK CORDLESS HANDSET)
Registration links the base to a cordless handset. Once a handset is
registered it can use the base’s phone connection. A cordless handset will
not operate until it is registered to the base. During the registration
process, keep the handset near the base.
1. Press the FLASH/PROGRAM button on the base until
LINK HANDSET
shows in the display.
2NO
is the default setting.
2. Press the 1 number key or press the MESSAGES/CID (or) button
on the base to scroll to
1YES
.
3. Press FLASH/PROGRAM on the base to confirm handset is linked to the
base.
WAITING HANDSET REGISTRATION
shows in the display.
4. Press the flash/program button on the handset until
LINK BASE?
shows
in the display.
NO
is the default setting.
5. Press cid/vol (or) button on the handset to scroll to
YES
.
6. Press flash/program on the handset again to confirm. You will hear a long
confirmation tone when the handset is successfully linked to the base.
DEFAULT SETTING
1. Press the FLASH/PROGRAM button until
DEFAULT SETTING
or
DEFAULT
shows in the display.
2NO
is the default setting.