Filter
Top Products
13
2. Use the touch-tone pad to enter your new 3-digit security code. For
example, press the 6, 2, and 8 number keys for security code 628. The
default security code is
123
.
NOTE: If you want to re-enter the security code, enter the numbers again and
press the FLASH/PROGRAM button. The new numbers replace the old numbers.
3. Press FLASH/PROGRAM again to store your selection. You will hear a
confirmation tone, and the new security code shows in the display.
RINGER LEVEL
NOTE: This setting may only be made with the base.
1. Press the FLASH/PROGRAM button until
SET RING LEVEL
shows in the
display. 1
HI
is the default setting.
2. Press 1, 2 or 3 on the base touch-tone pad to enter your selection, or use
the MESSAGES/CID (or) button to scroll to your selection.
3. Press FLASH/PROGRAM again to store your selection.
NOTE: You can press FLASH/PROGRAM at any time to go to the next option.
NOTE: If you turn the ringer OFF, “RINGER OFF ” shows in the base display.
RINGER TONE
NOTE: This setting may be made with the base and the handset.
You may choose from three different ringer tones.
1. Press the FLASH/PROGRAM button until
SET RINGER TONE
or
RINGER
TONE
shows on the display. The default ringer tone is
1
.
2. Use the touch-tone pad to select 1, 2, 3 or use the MESSAGES/CID
(or) button on the base unit or cid/vol (or) button on the
handset to scroll to your selection. The ringer tone plays for few seconds.
3. Press FLASH/PROGRAM again to store your selection. You will hear a
confirmation tone.