Filter
Top Products
19
1. Make sure the phone is ON.
2. Press memory and then press 7.
3. When you hear the access tone, press memory and then press 8.
4. At the next access tone, press memory and then 9.
TIP: Wait for the access tones before pressing the next memory button, or
your call might not go through.
INSERTING A PAUSE IN THE DIALING SEQUENCE
Press the # pause button to insert a delay in the dialing sequence of a
stored telephone number when a pause is needed to wait for a dial tone
(for example after you dial 9 for an outside line, or to wait for a computer
access tone). Each pause counts as one digit in the dialing sequence.
Pause shows in the display as a “
P
”.
REVIEWING AND DELETING STORED NUMBERS
1. Press the memory button.
2. Use the CID/VOL left (-) and right (+) arrow buttons to scroll to the desired
memory location or press 0-9.
3. While the entry is displayed, press the channel/delete button. The
display shows
DELETE ?
4. Press channel/delete again to erase the current record. You will hear a
confirmation tone.
ANSWERING SYSTEM OPERATION
This section discusses the buttons and features on the answering system.
MESSAGES INDICATOR
The messages indicator shows you the number of new messages you
have received. The answer on/off button must be turned on for the
messages indicator to work.