Filter
Top Products
16
DELETING THE CURRENT RECORD
1. Press channel/delete button. The display shows
DELETE?
2. Press delete/channel again to erase the current record. The display
shows
DELETED
, and you will hear a confirmation tone.
DELETING ALL RECORDS
1. Press and hold channel/delete. The display shows
DELETE ALL?
2. Press channel/delete again to erase all records. You will hear a
confirmation tone.
DIALING A CALLER ID NUMBER
1. Make sure the phone is OFF.
2. Use the CID/VOL left (-) and right (+) arrow buttons to display the
desired Caller ID record.
3. Press the TALK/CALLBACK button to dial the number.
CHANGING THE NUMBER FORMAT
The format/answerer button lets you change the format of the displayed
number. The available formats are as follows.
7-digit 7-digit telephone number.
10-digit 3-digit area code + 7-digit telephone number.
11-digit long distance code “1” + 3-digit area code + 7-digit
telephone number.
1. Use the CID/VOL left (-) and right (+) arrow buttons to scroll to the
number you want to call back.
2. If the number will not dial as shown, press the format/answerer button.
Repeat if necessary, until the correct number of digits are shown.
3. Press TALK/CALLBACK.
NOTE: To clear the local area code, press and release flash/program, until
ENTER AREA CODE is displayed. Then press channel/delete to delete the
current local area code, or enter “000 ” to replace the current one.