Filter
Top Products
8
5. Place handset in the base to charge for 12 hours. The CHARGE/IN USE indicator
(on the base) comes on to indicate that the battery is charging. If you don’t
charge the handset battery properly (for 12 hours) when you first set
up the phone, performance of the battery will be compromised.
6. Plug the long telephone line cord into the PHONE LINE jack on the base
and into a modular jack.
7. Raise the base antenna.
CAUTION: Use only the ATLINKS USA 5-2510 power supply that came with
this unit. Using other power supplies may damage the unit.
INSTALLATION NOTE: Some cordless telephones operate at frequencies that
may cause interference to nearby TVs and VCRs. To minimize or prevent such
interference, the base of the cordless telephone should not be placed near or on
top of a TV or VCR. If interference continues, moving the cordless telephone
farther away from the TV or VCR will often reduce or eliminate the interference.
6
7
5