Filter
Top Products
7
DESKTOP INSTALLATION
1. Make sure the mounting bracket is securely fastened to ensure proper
charging. The words "This end up for desk use" should be near the top
or back of the unit."
2. Set the TONE/PULSE switch to TONE for touch-tone service, or PULSE
for rotary service. If you don’t know which type of service you have,
check with the phone company.
3. Set RINGER switch (on the handset) to ON.
4. Plug the power supply cord into the POWER 12V DC jack on the base
and into an AC outlet.
Installation continued on next page.
CAUTION: Use only the ATLINKS USA 5-2510 power supply that came with
this unit. Using other power supplies may damage the unit.
3
1
2
4