Filter
Top Products
30
2. Use the CID/VOL ( or ) arrows to choose the number.
3. Press talk/callback or spk button on the handset and the number
dials automatically.
NOTE: If you get a busy signal and want to keep dialing the number, press the
redial button to quickly redial the number.
EXIT
Press the exit button on the handset to end an operation, such as
TRANSFER or exit the programmable menu.
PAGING
This feature helps you locate a misplaced handset. All handsets must be
registered to use the page function. If your handsets are not registered,
follow the instructions in the Handset Registration section of this manual.
HANDSET TO HANDSET PAGING
NOTE: For model 25825, you must register an additional handset (model
25802) in order to use this feature.
Make sure the phone is OFF (not in talk mode).
1. Press the int/conf button on the handset.
2. Use the touch-tone pad on your handset to enter the handset number you
want to page when
PAGING EXTENSION?
shows in the display. The
paged handset beeps for 2 minutes.
3. To cancel the page, press the *exit button, or press the int/conf button.
PAGING FROM BASE/GROUP PAGING
1. Press the page button on the base. All registered handsets (or the
single handset on model 25825) beep for 2 minutes and “
PAGING
FROM BASE
” shows on each handset’s display.
PAGING
EXTENSION ?