GE 25403 Intercom System User Manual


 
20
Connections & Setup
3. Press the SELECT button.
4. Use the REVIEW < or > button to scroll to REGIONAL AREA CODES.
5. Press the SELECT button. All six regional area code fields and Enter Number show in the display.
6. Use the touch tone pad on your phone to enter up to six regional area codes.
7. Press the SELECT button to save.
NOTE: If you make a mistake, press the DELETE button to erase a wrong digit.
Manually Setting the Time and Date
The time and date is automatically set when you receive the first CID call. To manually reset the time and date, follow the steps below.
NOTE: Automatic time set is not applicable to model 25403.
1. Press the MENU button while in standby mode.
2. Use the REVIEW < or > button to scroll to SET TIME & DATE.
3. Press the SELECT button.
4. Use the REVIEW < or > button to scroll to SET CLOCK
5. Press the SELECT button, and the cursor moves to the hour field.
6. Use the REVIEW < or > button to button to select the hour.
NOTE: AM or PM will be set accordingly with selected hour
7. Press the SELECT button, and the cursor moves to the minute field.
8. Use the REVIEW < or > button to select the minutes.
9. Press the SELECT button, and the cursor moves to the month field.
10. Use the REVIEW < or > button to select the month.
11.Press the SELECT button, and the cursor moves to the date field.