GE 25403 Intercom System User Manual


 
14
Connections & Setup
3. Press the SELECT button.
4. Use the REVIEW < or > button to scroll to SET RING TONE.
5. Press the SELECT button. The ringer tone settings for each of the four telephone lines show in the display.
6. Use the REVIEW < or > button to scroll to through each ringer tone for LINE 1. A sample ringer tone is generated when you scroll to
individual ringer tones. Choose from eight different tones, or turn the ringer OFF.
NOTE: If you select OFF, the cursor automatically moves to the CID ON/OFF option. Use the REVIEW < or > button to select CID ON or OFF. (ON allows the unit to detect
and display CID records for the corresponding telephone line. OFF disables the function for the corresponding telephone.) Press the SELECT button.
NOTE: On model 25403, you cannot select CID ON/OFF.
7. Press the SELECT button to save. The cursor automatically moves to LINE 2.
8. Repeat steps 6 and 7 for each telephone line. After you select the ringer tone for LINE 4, press the EXIT button.
NOTE: The line indicators flash for incoming calls even if the ringer is disabled.
Priority Line
The priority line (one of the four lines) has to have precedence over the other three lines.
1. Press the MENU button while in standby mode.
2. Use the REVIEW < or > button to scroll to SET PHONE OPTIONS.
3. Press the SELECT button.
4. Use the REVIEW < or > button to scroll to SET PRIORITY LINE.
5. Press the SELECT button.
6. Use the REVIEW < or > button to scroll to 1, 2, 3, or 4. The default is LINE 1.
7. Press the SELECT button to save.