GE 00019577 Telephone User Manual


 
31
4. To dial the displayed number, pick up the handset or press Dial again.
If You Did Not Program Your Local Area Code in the Setup Menu
1. Press the CID button first to go into the CID review mode, and then use the 5 and 6
button to scroll to the number you want to dial. You will only see 11-digit numbers
(i.e. 1-234-555-1234).
2. Press
Dial to dial back. You may adjust the number format if FORMAT CHANGE? shows
in the display.
Call Waiting Caller ID
This feature lets you see (in the display) who is calling when you are on the phone and
hear the call waiting tone in the receiver. The caller identification information appears in
the display after you hear the tone.
IMPORTANT: In order to use this feature, you must subscribe to either the standard Name/
Number Caller ID Service or Caller ID with Call Waiting Service. To know who is calling while
you are on the phone, you must subscribe to Caller ID with Call Waiting Service.
Digital Answering System
This unit incorporates a digital answering system with a total voice recording capacity of
approximately 40 minutes. The messages are saved in non-volatile memory and will not be
lost even in the event of total power outage.
Once the recording capacity of the unit is reached or a line has its maximum number
of 58 messages, the unit displays VM MEMORY FULL on the screen, and cannot record
message for this mailbox.
Unit will announce a busy voice message to caller if system is busy and unable to serve
the caller. Furthermore, this unit is able to answer and record caller messages while you
are talking on the other line.
Answering System Indicator
Check the Answer L1 and L2 button/indicator for answering system status.
Off: Answering system is off.
On: Answering system is on.
Flashing: New voice message was received.
Digital Answering System