Filter
Top Products
5
Adding a Pause to the Dialing Sequence
Use the #/PAUSE button to insert a delay in the dialing
sequence when storing a number, for example, when you
need to dial 9 to get an outside line.
Pause function is enabled when the #/PAUSE button is
pressed and held for seconds.
Press and hold #/PAUSE button at the point in the dialing
sequence in which a pause is required.
The pause time is approximately four seconds, if additional
time is needed, press and hold the #/PAUSE button again.
Changing a Stored Number
Follow the same steps as “Storing a Number into Memory.”
The new numbers will overwrite the existing numbers.
Dialing a Number from Memory
You can dial numbers from memory when using the handset
or speakerphone. When you get a dial tone, press the DIAL
button followed by the memory location (0-9) for the number
you want to dial.
Dialing the Emergency Quick Dial Numbers
If you have previously programmed your Emergency Quick
Dial numbers, you only need to press the button after you
get a dial tone.