GE 00004007 Cordless Telephone User Manual


 
16
Programming the Handset
Area Code
1. Make sure the cordless handset is OFF (not in talk mode).
2. Press the prog/mute button to go to the main menu.
3. Press CID/vol orbuttons to scroll to HANDSET SETUP.
4. Press prog/mute button to confirm.
5. Press the CID/vol
or buttons to scroll to the AREA CODE menu.
6. Press prog/mute button to enter the menu.
SET AREA CODE - - - shows in the display.
7. Use the touch-tone pad to enter your 3-digit area code.
8. Press the prog/mute button to confirm. You will hear a confirmation tone and the new area code
shows in the display.
NOTE: To restore the default setting to - - -, press and release the delete button when “SET AREA
CODE” shows in the display.
De-Registration
De-registration cancels registration. During the de-registration process, keep the handset near the
base.
1. Make sure the cordless handset is OFF (not in talk mode).
2. Press the prog/mute button to go to the main menu.
3. Press CID/vol
orbuttons to scroll to HANDSET SETUP.
4. Press prog/mute button to confirm.
5. Press the CID/vol
or buttons to scroll to the DEREGISTRATION menu.
6. Press prog/mute button to enter the menu. REGISTRATION 1YES 2NO shows in the display.
7. Use the touch tone pad on the handset to select 1 or 2, or use the CID/vol
or buttons to
scroll to your selection. 2NO is the default setting.
WARNING: It is not recommended that a handset be de-registered unless absolutely necessary
because once a handset is de-registered, that handset’s telephone features cannot be used until
the handset is re-registered.
8. Press the prog/mute button to confirm your selection. If you choose to 1YES to de-register,
MOVE NEAR TO BASE
shows in the display for two seconds, then CONFIRM? 1YES 2NO appears
in the display.
9. Use the touch tone pad on the handset to select 1 or 2, or use the CID/vol
or buttons to
scroll to your selection. 1YES is the default setting.