GE 00004007 Cordless Telephone User Manual


 
12
Programming the Handset
Ringer Volume
There are two ways to adjust the ringer volume.
Method 1:
1. Make sure the cordless handset is OFF (not in talk mode).
2. Press the #pause/ringer on-off button to display SET RINGER 1HI 2LOW 3OFF.
3. Use the touch tone pad on the handset to select 1, 2 or 3, or use the
CID/vol orbuttons to
scroll to your selection. 1HI is the default setting.
4. Press #pause/ringer on-off button again to save and display the new selection for a few seconds.
Method 2:
1. Make sure the cordless handset is OFF (not in talk mode).
2. Press the prog/mute button to go to the main menu.
3. Press CID/vol orbuttons to scroll to HANDSET SETUP.
4. Press prog/mute button to confirm.
5. Press the CID/vol
orbuttons to scroll to the RINGER VOLUME menu.
6. Press prog/mute button to enter the menu. SET RINGER 1HI 2LOW 3OFF shows in the display.
7. Use the touch tone pad on the handset to select 1, 2 or 3, or use the CID/vol
orbuttons
button to scroll to your selection. 1HI is the default setting.
8. Press the prog/mute button to save your selection. You will hear a confirmation tone and the
new volume setting shows in the display.
NOTE: If you turn the ringer OFF, the ringer off icon
shows in the display.
Cell Ring Tone
You may choose from ten different ringer tones and ten different melodies.
1. Make sure the cordless handset is OFF (not in talk mode).
2. Press the prog/mute button to go to the main menu.
3. Press CID/vol orbuttons to scroll to HANDSET SETUP.
4. Press prog/mute button to confirm.
5. Press the CID/vol
orbuttons to scroll to the CELL RING TONE menu.
6. Press prog/mute button to enter the menu. SET CELL TONE 11 shows in the display. 11 is default
setting.
SET CELL TONE
11