Filter
Top Products
4-8
Telecom1 < >
UNA SMP DUP ---
Telecom unable comply?
No reason
Unable < >
NOR BYS ---
* Ready for calling *
ACK BQ CALL CH70
Working channel < >
input digits =
Channel?
Telecom1 < >
UNA SMP DUP ---
When changing communication mode.
Press the [ENT] key.
Press the [CALL] key.
Press the [ENT] key.
Press the [ENT] key.
Select reason.
Press the [SELECT] key.
(To select reason why unable
to comply.)
Press the [SELECT] key.
(To change working channel.)
Press the [ENT] key.
Enter working channel.
If a diffrent communication mode is selected as shown
above, “ACK BQ” call is first transmitted and “ACK RQ”
call automatically continues.
This means the message proposed here is transmitted
as ACK RQ signal (not ACK BQ).
Finally the “Wait for ACK BQ” screen appears.
(*1)
(from previous page)
Example when selecting “Unable”.
(Proposal from transmittion station
is not acceptable.)
Example when
selecting “Simplex”.