Filter
Top Products
4-5
4.2 Receiving Individual Call (ACK RQ)
General
When an individual call is received, the FM-8500 responds to the
call depending on the setting of automatic acknowledge (AUTO
ACK) function:
• AUTO ACK: ON (“auto” appears.)
The DSC transmits the acknowledge back (ACK BQ)
signal automatically.
• AUTO ACK: OFF (“manual” appears.)
Verify contents of receive message by pressing the
[ENT] key successively, then manually transmit the
ACK BQ signal by pressing the [CALL] key.
Figure 4-2 Receiving "Individual Call"
Setting of “ABLE” or “UNABLE”
When AUTO ACK function is ON, you can select either “able” or
“unable” (to comply) for proposal from other station. See the next
page.
Own Ship Coast Station
Individual call (ACK RQ)