Furuno FM-8800D/8800S Telephone User Manual


 
2. CONNECTIONS
2-9
2.10 Wire connection of VHF console
1. Remove the cover assembly and printer assembly (or concealing lid) form the console.
For the printer assembly, remove the cables connected at the Transceiver Unit and the
terminal board.
Cover assembly
Binding screw F
M4X10
4 places
Console
Terminal board
Printer assembly
or Concealing lid
Binding screw F
M4X10
8 places
2. Connect the power cable from the ship to the terminal block 1 (+) and 2 (-).
Power cable
from the ship
Terminal board
12345678
-
1
2
1. Wiring conductor
2)Press the screwdriver to arrow direction
to open the spring in the round hole.
1)Insert a screwdriver which blade edge
is 3.5 X 0.5mm to the square hole.
4)Remove the screwdriver.
3)Insert the wire to the round hole.
Terminal Board Wiring
2. Wiring
Square hole
9 10mm
Round hole
3. Connect the ground wire from ship to each ground terminal for the transceiver unit and
the junction box.
4. Connect cables from external equipments to the junction box.
5. Fix the printer assembly (or concealing lid) and the cover assembly.