Filter
Top Products
1. MOUNTING
1-3
Mounting procedure for tabletop, overhead and bulkhead mounting
1. Using the hanger as a template, mark fixing holes in the mounting location.
2. Fix the hanger to the mounting location with self-tapping screws and washers (supplied).
(For added support, use nuts, bolts and washers instead of self-tapping screws.)
3. Screw the knob bolts with washers into the transceiver unit.
4. Set the transceiver unit to the hanger and tighten knob bolts.
265
251
110
Keep pressed for 4 s in case of DISTRESS.
The alert is transmitted with steady lighting.
PQRS
GHI
IntCom
*
7
4
1
WXYZ
MNO
PRINT
DW
#
0
HI/L0
TUV
JKL
ACK
SCAN
8
5
9
6
ENT
FILE
MENU
DEFABC
2
3
CH16
DISTRESS
MSG
CALL
SHIFT
LOG
CANCEL
ALM STOP
USA
INTL
TEST
Keep pressed for 4 s in case of DISTRESS.
The alert is transmitted with steady lighting.
PQRS
GHI
IntCom
*
7
4
1
WXYZ
MNO
PRINT
DW
#
0
HI/L0
TUV
JKL
ACK
SCAN
8
5
9
6
ENT
FILE
MENU
DEFABC
2
3
CH16
DISTRESS
MSG
CALL
SHIFT
LOG
CANCEL
ALM STOP
USA
INTL
TEST
100
100
• All dimensions in millimeters.
• Leave sufficient space at the sides and rear of the unit to provide easy access for
maintenance and service.
Mounting dimensions for tabletop, overhead and bulkhead mounting