Filter
Top Products
1
1. Checking the Delivered Product
Before using the QFP-100P probe header, confirm that the following components are included in the
box:
• QFP-100P Probe Header
*1
: 1
• Screws for securing header board (M2 × 10 mm, 0.4 mm pitch) : 4
• Washer : 4
• NQPACK100RB179
*2
: 1
• HQPACK100RB179
*3
: 1
• Operation manual (Japanese version) : 1
• Operation manual (English version, this manual) : 1
*1 : Referred to as "header board". Header board is mounted on the YQPACK100RB179 (Tokyo
Eletech Corporation), referred to as “YQPACK”.
*2 : IC socket manufactured by Tokyo Eletech Corporation, referred to as “NQPACK”, and sup-
plied with a special screwdriver and 3 guide pins. A socket offering higher reliability,
NQPACK100RB179-SL (Tokyo Eletech Corporation, sold separately), can be used by making
an IC socket mounting hole on the user system board. For more information, contact Tokyo
Eletech Corporation.
*3 : IC Socket cover manufactured by Tokyo Eletech Corporation, referred to as “HQPACK”, with
4 screws for securing HQPACK (M2 × 6 mm, 0.4 mm pitch).
This product is used as an emulator system by combining with an optional emulator and adapter
board.
Consult the Sales Department or the Support Department of Fujitsu Limited for the adapter or the
emulator of this product.
2. Handling Precautions
The header board is precision-manufactured to improve dimensional accuracy and to ensure reliable
contact. The header is therefore sensitive to mechanical shock. To ensure correct use of the header
in the proper environment, observe the following points regarding its insertion and removal:
• To avoid placing stress on the NQPACK mounted on the user system board during connecting
the header board.