Filter
Top Products
PREFACE
Thank you for purchasing the QFP-100P
*1
probe header (MB2147-583) for the F
2
MC
*2
-16 family-
emulator.
The QFP-100P probe header is used to connect the F
2
MC-16L/16LX emulator (MB2147-01
*3
)and
the F
2
MC-16L/16LX emulator PGA-299P adapter board (MB2147-20
*4
) to a user system. That uses
Fujitsu F
2
MC
*1
-16LX microcontroller MB90940 series (QFP-100P).
This manual explains the handling of the QFP-100P probe header for the F
2
MC-16 family emulator.
Before using the MB2147-583, be sure to read this manual.
Consult the Sales representatives or the Support representatives of Fujitsu Limited for mass-pro-
duced MCUs and evaluation MCUs.
*1 : The lead pitch of PACKAGE (FPT-100P-M06) is 0.65 mm and the body size is 14 mm × 20
mm. Using the product safely.
*2 : F
2
MC is the abbreviation used for FUJITSU Flexible Microcontroller.
*3 : referred to as "emulator"
*4 : referred to as "adapter board"
■ Handling and use
The handling and use of this product and notes regarding safety are included in the hardware manual
of the F
2
MC-16 family emulator.
Follow the instructions in for the use of this product.
• F
2
MC-16L/16LX EMULATOR
MB2147-01 HARDWARE MANUAL
• F
2
MC-16L/16LX EMULATOR PGA-299P ADAPTER BOARD
MB2147-20 HARDWARE MANUAL
■ Caution of the products described in this document
The following precautions apply to the product described in this manual.
CAUTION
The wrong use of a device will give an injury and may cause malfunction on cus-
tomers system.
Cuts
This product has parts with sharp points that are exposed.
Do not touch edge of the product with your bare hands.
Damage
When connect the header board to the user system, correctly position the index
mark (▲) on the NQPACK mounted on the user system with the index mark (▲)
on the header board, otherwise the emulator system and user system might be
damaged.
Damage
When mounting a mass production MCU, correctly position pin 1, otherwise the
mass production MCU and user system might be damaged.