Filter
Top Products
There may be a short delay before the net-
work responds. In the meantime, the message
Please Wait is displayed. This is followed by
the message Call Waiting ON, Not available,
or Call Waiting OFF.
To switch between two calls
When one call is active and the other is on hold,
you can switch between them by pressing .
To make a second call
while a call is in progress
Method 1
If anything else but the time is shown in the
bottom line of the display, erase it with the
CLR key.
1. Press to put the current call on hold.
The message 1 on hold (1st call on hold) is
displayed.
2. Enter the number you wish to call, or recall
it from the phone book or the dialled
number memory, and press .
Method 2
●
Enter the number you wish to call and press
. The message 1 on hold is displayed.
To receive a second call
while engaged in a call
You will hear a tone in the ear piece and the
message Call Wait appears in the display when
the Call Waiting function is activated.
Do one of the following to:
a. End the current call and accept the
waiting call by pressing .
The phone rings, and the question
Answer? appears in the display.
Press to answer the waiting call.
b. Put the current call on hold and accept
the waiting call by pressing .
The message 1 on hold is displayed.
c. Reject the waiting call and continue the
current call by pressing 0, followed by .
The waiting call is cleared. If the caller’s
network supports it, the caller will hear an
engaged (busy) tone.
If you have activated Divert On Busy, the
waiting call is diverted to the number you have
specified, for example the number of your
answering machine.
To end the current call
End the current call by pressing .
The message Retrieve held call? appears in
the display.
Do one of the following:
a. End the held call by pressing .
b. Return to the held call by pressing YES
within three seconds.
If you do not press or within three
seconds, the message Retrieve held call?
disappears from the display and the held call
is ended automatically.
To receive a third call
Provided the Call Waiting function is activated,
you may receive a third call when you are
engaged in one call and have a second call on
hold. You will hear a tone in the ear piece and
the message Call Wait appears in the display.
You may either accept the third call or reject it.
Accepting
Only one call can be on hold at a time. If you
wish to accept the third call, you must, end the
first or the second call, or both. See To end the
current call above.
a. If you end the first or the second call, you
can accept the waiting call (the third call) by
pressing .
b. If you end both calls, the phone rings and
the question Answer? appears in the
display. Press to answer the waiting
call.
Rejecting
Press 0, followed by .
The third call is cleared. Provided the caller’s
network supports this function, the caller will
hear an engaged (busy) tone.
If you have activated Divert On Busy, the
waiting call is diverted to the number you have
specified, for example the number of your
answering machine.
Advanced Functions
38 EN/LZT 126 1298 R1A