Filter
Top Products
CALL METERING
35
BusinessPhone 250 / BusinessPhone 50
Standard Telephone / Economyplus Telephone
CALL METERING
GENERAL Note: This chapter only applies to the Standard telephone.
When the BusinessPhone system is provided with metering
information from the public net, the call metering function
can be used to check the costs of outgoing calls.
The BusinessPhone system offers several options to obtain
this information.
COST INDICATION During an outgoing external conversation the display shows
the actual costs. If you want to deactivate the cost indication.
Dial
Verification tone, the cost indication is deactivated.
Press
To activate the cost indication again for all further calls,
repeat the procedure.
COST OF
THE LAST CALL After finishing an outgoing external call, you have the possi-
bility to see the cost of the last call.
Dial
The display shows the cost of the last call.
Press to finish the procedure
READ OUT YOUR
OWN COST
COUNTER This is useful, when you want to check the accumulated
costs of your own counter.
Dial
The system shows the accumulated costs since the last reset.
Press to finish the procedure