Filter
Top Products
Reference 33
No
t
for
Co
m
m
ercial
Us
e
E
ri
c
ss
o
n
Bu
s
i
n
e
ss M
o
b
il
e
N
etwor
k
s
B
V
The base station rings, but I can’t answer the call. Why not?
The base station does not recognise the telephone number as being assigned to
one of the handsets, therefore it is not forwarding the call to a handset. This
could mean that this number has been assigned to another device, for instance
an analogue fax machine. If you don’t want to be disturbed by this ringing,
you can turn off the volume of the base station see “Ringer” on page 21.
Someone is calling me and the phone number is displayed
instead of the name in the phone book. What is wrong?
The number in the display differs from the number in the phone book or is not
present in the phone book at all. You can use “Adding last dialled and a
caller’s number” on page 15 to add the number to the phone book or use
“Changing names and numbers” on page 15 to change the number according
to what is displayed.
Someone is calling me, but no caller identification can be seen in
the display. What is wrong?
Only the first three handsets on the base station can show the caller identifica-
tion. It is also possible that no caller identification was sent by the network.
I cannot call certain numbers. Why not?
Call barring is on or your call budget has been exceeded. For further details,
see “Call barring” on page 26 and “Call budget type” on page 26.
The external line light on the base station is flashing quickly.
Why?
There is a problem with the connection between the base station and the tele-
phone line. Check the telephone cable.
I hear a warning tone and the signal strength indicator cannot be
seen. What is wrong?
The handset is not connected to the base station. The handset is probably out
of range. Bring the handset back within range of the base station.
It is also possible that the handset has not been subscribed or that the subscrip-
tion has been cancelled. It could also mean that a base station other than the
one which you are close to has been selected. See “Using base stations” on
page 28 and “Subscribing a DT200 handset to the 230i base station” on
page 29.
I hear a warning tone and the battery icon is flashing. What is
wrong?
The battery is almost flat. Put the handset in the base station to charge the
battery.
The red light on the base station is on. What is wrong?
Nothing is wrong. The external line is busy or the subscription mode is active.