Filter
Top Products
To remove the old battery, insert the special
tool into the battery door lock aperture adjacent
to the battery symbol on the pager back. While
gently pressing the tool into the door lock
aperture, slide the battery door off in the
direction of the arrow. All your messages will
be retained while the battery is changed but
you should reset the clock after installing the
new battery.
Insert the new battery in the direction shown on
the case back by sliding in the negative (-) end
first. Slide the battery door back into position
so that it locks automatically with a click.
The battery door must always be secure before
the MIT message pager is taken into a
hazardous area.
Page 4
battery door lock
WARNING