Filter
Top Products
English
EN 4
Operation
Hands free function
1. Press
s
. The hands free function will be activated and the LED indicator next to
the button will illuminate.
2. Dial the required telephone number. Adjust the volume using the volume control
located on the underside of the telephone.
3. Speak towards the microphone located on the front edge of the telephone.
4. Press
s
to terminate the call.
If you wish, you can switch between handset and hands free mode by simply pressing
s
or lifting the handset.
Please note!
Please remember that in hands free mode it is only possible for one person at a time to talk. The switch-
over between speaker and microphone is automatic and dependent on the sound level of the incoming call
and the microphone respectively. It is therefore essential that there are no loud noises, e.g. music, in the
immediate vicinity of the telephone, as this will disrupt the hands free function.
Group listening
Group listening allows anyone in the same room as the base unit to hear both parties
and follow the conversation through the base units speaker.
The ongoing call is not affected and can continue via the handset or optional headset.
1. Lift the handset or press the headset button, dial the required telephone number.
2.
Once the call has been connected, press
s
to activate the Group Listening
function. The LED indicator by the button will illuminate and the conversation
can then be heard through the speaker.
3. Adjust the volume using the volume control on the underside of the telephone.
4. To deactivate the Group Listening function, press
s
again.