Filter
Top Products
English
EN 11
Other
Alarm settings
When the alarm clock is activated will be displayed in the standby mode.
Once the alarm clock goes off a tone will be heard for one minute, to switch off
the alarm press any button on the telephone.
1. Press and hold
v
until the alarm setting ashes.
2. Scroll to the required function (off/on/repeat daily) using
v
/
V
. Press
0
.
To cancel the alarm, proceed to point 5.
3. Select the hour (00-23) using
v
/
V
. Press
0
.
4. Select the minute/s using
v
/
V
. Press
0
repeatedly to return to standby mode.
5. To cancel the alarm while it is sounding, press
0
or lift and replace the
handset.
Connection of additional equipment
On the side of the telephone there is a socket marked
8
, this will allow
additional telephone equipment i.e. cordless, modems etc to be connected
allowing access to the telephone line.
You can recongure the phone ports using the switch (1:2) on the underside of the telephone (behind
the attached cover), so that the telephone port (1) and the outer port (2) are connected in parallel.
Declaration of conformity
Doro hereby declares that this product, Doro Congress 205, conforms with the
essential requirements and other relevant regulations contained in the Directive
1999/5/EC.
A copy of the manufacturer’s declaration is available at www.doro.com/dofc