Filter
Top Products
English
4
Functions
1. Press . Scroll to HS SETTINGS. Press OK.
2. Scroll to desired function e.g. LANGUAGE. Press OK.
3. Scroll to desired setting. Press OK.
ALARM When the alarm is activated will be shown in standby mode. When the alarm goes
off, a signal will be heard for 45 seconds. The signal can be turned off with any button. If
SNOOZE is activated the alarm will go off again approx. 7 minutes later. Turn the alarm
off permanently via the menu or by holding
L
down for a few seconds. The volume is
determined by the set ringer level.
RING SETUP The handset’s ringer signal. INT/EXT=internal/external.
Melodies 2,3,4... can continue for up to 8 seconds if the call is answered in another phone.
TONE SETUP Any of the following warning tones can be disbled, Keytone, low battery and range.
LANGUAGE The language of the display texts.
RENAME HS The text shown in standby mode.
HS DISPLAY Show name or time in standby mode.
AUTO ANSWER The call is answered when the handset is lifted from the base.
DATE & TIME Setting the date/time. The format of date/time can also be adjusted.
System settings
System PIN is 0000 on delivery.
1. Press . Scroll to BS SETTINGS. Press OK.
2. Scroll to desired function. Press OK.
3. Enter the desired setting. Press OK.
BS RINGER/ The base unit’s ringer signal can be
RING VOLUME adjusted. Only applies to NeoBio 15r/25r.
DELETE HS Warning: To de-register a handset: WARNING, A deregistered handset can not be used with
the system.
DIAL MODE TONE/PULSE, should normally be set to TONE.
FLASH TIME RECALL TIME.
LONG=New Zealand.
MEDIUM=France/Portugal.
SHORT=others incl. UK/AUS.
CHANGE PIN The code(e.g. 0000) can be changed.