Filter
Top Products
35
Anonymous Call
1. If DISABLE is selected, full URI and name are sent to the receiver’s
phone when the user makes a phone call. The URI and name of the
caller are displayed on the receiver’s phone.
2. When Full URI is selected, it uses “Anonymous” as its display name
and URI when the user makes a phone call. It may display
“Anonymous” or nothing on the receiver’s phone.
3. When Display Name is selected, only the display name is replaced by
“Anonymous” when the user makes a phone call. It may display
“Anonymous” or nothing on the receiver’s phone.
Anonymous Call Reject
Select Enable to reject anonymous calls.
Call Forward
1. Click No Answer to enable call forwarding to another number when no
one answers the phone after 180s (default). The timer can be changed
from 0-600s. Refer to section 6.18 to change the timer.
2. Click Busy to enable call forwarding to another number when you are
busy on the phone.
3. Click Unconditional to transfer all incoming calls to another number.
Enter the call forwarding number in the text box.
Hot Line
1. Enable or disable Hot Line
2. Number: a phone number which is the destination of the Hot Line
3. Timeout: the time after which the phone will dial the pre-configured
phone number automatically
Transfer end of Conference
Call
Enable or disable the feature of transferring calls after the three-way
conference call is ended.
Pound Key Dial
Enable or disable Pound key Dial. Pound Key ( # ) can be defined as a
<send> key.
Missed Call Display
Enable or disable to display missed calls on the LCD screen.