Filter
Top Products
3.3 PROGRAMMING LETTERS, NUMBERS and MESSAGES
The keypad on the 1814 system has all the letters of the alphabet, the numbers 0 through 9, and a
space key printed on it. This allows the keypad to be used to program all names and numbers into
the systems electronic directory.
NOTE: Names should not be programmed from a remote location using a touch-tone telephone.
3.3.1 Programming Letters and Numbers
When entering names into the electronic directory using the system keypad or a touch-tone
telephone, pressing the key once will display the first letter listed on the button, pressing twice will
display the second letter, pressing it a third time will display the third letter, and pressing it a fourth
time will display the number (or fourth letter).
Example using the number 6 key:
MNO
6
Press one time to display the letter M
Press two times to display the letter N
Press three times to display the letter O
Press four times to display the number 6
The chart below provides the sequence required to enter each letter and number from the keypad into
the system memory. A sequence is also provided to add a space, clear the display if a mistake is
made, and a sequence to skip a name if there is a desire not to provide a name with a phone number.
To Display Press To Display Press To Display Press
A 2 * N 6 6 * 0 0 *
B 2 2 * O 6 6 6 * 1 1 1 *
C 2 2 2 * P 7 * 2 2 2 2 2 *
D 3 * Q 7 7 * 3 3 3 3 3 *
E 3 3 * R 7 7 7 * 4 4 4 4 4 *
F 3 3 3 * S 7 7 7 7 * 5 5 5 5 5 *
G 4 * T 8 * 6 6 6 6 6 *
H 4 4 * U 8 8 * 7 7 7 7 7 7 *
I 4 4 4 * V 8 8 8 * 8 8 8 8 8 *
J 5 * W 9 * 9 9 9 9 9 9 *
K 5 5 * X 9 9 * SPACE 1 *
L 5 5 5 * Y 9 9 9 * CLEAR #
M 6 * Z 9 9 9 9 * SKIP NAME * #
29