Filter
Top Products
If You Cannot Reach a Destination ...
45
Step by Step
Deleting a displayed entry:
Press the "OK" dialog key to confirm your selection
Ending callback display:
Select and confirm.
or
oror
or
Press the key. The LED goes out.
or
oror
or
Press the key. The LED goes out.
Call Waiting (Camp-On)
Precondition:
Precondition:Precondition:
Precondition: You have dialed an internal number and hear a busy
signal. It is important that you reach the called party.
Wait (approx. 5 seconds) until "Camp-on" appears on the display and
the busy tone is followed by the ring tone.
The called party can then respond (Æ page 14)
Busy Override - Joining a Call in Progress
This function is only available if it has been configured by the service
technician (contact System Support).
Precondition:
Precondition:Precondition:
Precondition: You have dialed an internal number and hear a busy
signal. It is important that you reach the called party.
Select and confirm.
or
oror
or
Enter the code.
The called party and person to whom this party is talking hear an
alerting tone every two seconds.
If the called party has a system telephone with display, the following
appears on the screen: "Override: (station no. or name)".
You can now start talking.
Delete?
End?
Program/Service
Speaker
Camp-on
The called party can prevent automatic call waiting
(Æ page 15).
If this function is configured (contact System Support) you
will immediately hear the ring tone and the message "You are
camped on!" will be displayed.
Override?