DCS LCD 24B Telephone User Manual


 
NOTE: If the Hot Keypad feature has been turned off, you must first lift the
handset or press SPK or the MONITOR key if you are using a 7B phone before
you begin dialing.
FORWARD FOLLOW ME
When you want all calls to your extension forwarded to the extension where you
are now:
Dial 605 plus your extension number.
Receive confirmation tone and hang up.
If you want a specific extensions calls forwarded to your phone (Remote Call
Forward):
Dial 605 plus the desired extension number.
Receive confirmation tone and hang up.
NOTE: If the Hot Keypad feature has been turned off, you must first lift the
handset or press SPK before you begin dialing.
FORWARD TO AN EXTERNAL NUMBER
To forward outside calls to a number outside of your business, you must have a
FWD EXTERNAL button on your keyset.
While on-hook, press TRSF and then dial 102.
Dial 6.
Dial the outside line access code followed by the telephone number that you
want.
Press TRSF to store.
Press FWD EXTERNAL to turn the feature on and press it again to turn the
feature off.
NOTES:
1. External Call Forward will cancel all other call forwarding instructions.
2. If the Hot Keypad feature has been turned off, you must first lift the handset
or press SPK or the MONITOR key if you are using a 7B phone before you
begin dialing.
3. If your system software version is 1.06 or higher, intercom calls to your
station may be forwarded to an external number outside your business (your
installation company must enable this feature).
FORWARD DND
To forward your phone when you activate DND.
Dial 607 plus the extension number or group number.
Receive confirmation tone and hang up.
20
NOTE:
1. If the Hot Keypad feature has been turned off you must first lift the handset
or press SPK before you begin dialing.
CALL FORWARD OPTIONS
A display keyset may review or change call forward options and destinations.
Call forward access can be done via the keypad or by accessing the keyset
display features. To review or change call forward options:
Press TRSF 102.
Dial 0-6 to select the forward type (e.g., 1)
OR
Press UP or DOWN to select the forward type
Press the right soft key to move the cursor
Dial the destination number (e.g., 202)
OR
Press UP or DOWN to select the destination
Press the right soft key to move the cursor
Dial 1 to set
OR
Press UP or DOWN to select YES or NO
Press TRSF to store and exit
STATION CALL PICKUP
To pick up (answer) a call ringing at another station, lift the handset and dial 65
plus the extension number of the ringing phone.
NOTE: If the Hot Keypad feature has been turned off, you must first lift the
handset or press SPK or MONITOR before you begin dialing.
GROUP CALL PICKUP
To pick up (answer) a call ringing in any pickup group, lift the handset and dial 66
plus the desired group number 0120 or press the flashing GROUP PICKUP
key if available.
NOTES:
1. A group pickup key can have an extender for a specific pickup group.
2. If the Hot Keypad feature has been turned off, you must first lift the handset
or press SPK or the MONITOR key if you are using a 7B phone before
dialing the access code.
3. In system software version 1.06 or higher, pick up features may be used to
answer recalls to a station.
21