A SERVICE OF

logo

Mounting Options
14 Pegaso™ Powered Mobile Dock
Figure 9. Installing the Mobile Dock Assembly on the Mount
2. Loosen the Adjustment Knob slightly to tilt the Mobile Dock to the
desired mounting angle. Re-tighten the Adjustment Knob securely.
3. Route and connect all cables (see “Power and Peripheral Device Connec-
tions” starting on page 17 for more on connections). If you haven’t
already prepared the power connection, reference “Electrical Consider-
ations” starting on page 5 for wiring information.
Inserting/Removing the Pegaso
Inserting the Pegaso in the Dock
To insert a Pegaso into the Powered Mobile Dock, perform the following steps:
1. Slide the Pegaso into the Powered Mobile Dock.
2. Push gently downwards to insert the Pegaso until it is firmly seated in
the Dock.
Ram Ball
Ram Ball
Assembly
Adjustment
Knob