CyberData 3COM VCX PBX Intercom System User Manual


 
Server Setup Guide 930288A CyberData Corporation
12
4. For a quick summary of all of the necessary settings on the SIP Setup page (Figure 11), see
Table 3. For a step-by-step description of the necessary settings, go to Step 5.
Note If a setting parameter is not listed in Table 3 or Step 5, then your input for that setting
parameter is not required.
5. On the SIP Setup page (Figure 11), complete the following steps:
•In the SIP Server field, type the address of the VCX server.
•In the SIP User ID field, type the phone extension used in Step 4 of
Section 4.1, "VCX Configuration".
•In the Authentication ID field, type the phone extension used in Step 4 of
Section 4.1, "VCX Configuration".
•In the Password field, type in the password used in Step 4 of
Section 4.1, "VCX Configuration".
•For SIP Registration, select Yes.
For the Unregister on Reboot field, select No.
•In the Register expiration (minutes) field, type 2.
•In the Dial-Out Extension field, type an extension number that you want the Intercom to
call.
6. Click on the Save Settings button.
Table 3. SIP Setup Page Settings
SIP Setup Page Items Setting
SIP Server Type the address of the VCX.
SIP User ID Type the phone extension used in Step 4 of
Section 4.1, "VCX Configuration".
Authentication ID Type the phone extension used in Step 4 of
Section 4.1, "VCX Configuration".
Authentication Password Type in the password used in Step 4 of
Section 4.1, "VCX Configuration".
SIP Registration Select Yes.
Unregister on Reboot Select No.
Register expiration (minutes) Typ e 2.
Dial-Out Extension Type an extension number that you want the Intercom
to call.
Save Settings button Click on the Save Settings button only after you have
finished configuring all of the settings on the SIP
Setup page.