Filter
Top Products
Minutes
Seconds
Call Timer Display
02
08
Preparing for Use
Before you can use your cordless telephone, you must charge the Handset for 12
hours. Failure to do so will require recharging of the Battery Pack more often.
1. Place the Handset on the Base Unit for 12 hours.
2. After 12 hours, remove the Handset from the Base Unit.
Before you can use your cordless telephone, you must charge the
Handset for 12 hours. Failure to do so will require more frequent charging
of the Battery Pack.
NOTE: Depending on the frequency of use, once the Handset is fully charged,
it remains functional for approximately 6 hours of continuous use and
approximately 6 days when the Handset is off the Base Unit in standby mode.
Receiving Calls
1. When the phone rings, the LCD Screen
will show “RING.” If you have Caller ID,
the LCD Screen will show the Caller ID
information after the first ring.
2. With the Handset off the Base Unit,
press the Talk button. Start your
conversation. The Call Timer starts to
count.
3. To end your conversation, either press the Talk button or place the Handset
on the Base Unit. If you place the Handset on the Base Unit charge cradle, you
activate the Automatic standby feature.
NOTE: The Call Timer will start to count once you press the Talk button.
TALK
Cordless Telephone Operation
NOTE: While the 2.4 GHz frequency is inherently clearer, we suggest that you do
not use this phone within 20 feet of a working microwave. The microwave produces
frequencies in this range which may cause interference. This interference is
normal for all 2.4 GHz phones and should not be considered a product defect.
10